3B880 3B6880 3.6V Lithium Thionyl Chloride (Wafer Cell with pins)

Type: Lithium Thionyl Chloride. Voltage: 3.6 V.

Height: 7.5 mm. Diameter: 25.4 mm.

Termination: three PCB pins (tinned nickel).

Price: £17.36 each. £16.75 each if you buy two or more. Postage and packing included.

Replaces: Electrochem 3B6880, Electrochem 3B0880, Electrochem 3B880-QTC85.

Comments:
This 3B6880 or 3B880 3V Lithium battery replaces Electrochem 3B6880, Electrochem 3B0880, Electrochem 3B880-QTC85 batteries and many others.

The 3B6880 or 3B880 Wafer Cell has three PCB pins that protrude 8 to 9 mm. The central pin is the positive terminal, the two outer pins are the negative terminals.

This 3B6880 or 3B880 Wafer Cell is widely used for CMOS memory backup in personal computers, and for many other electronics applications. Also used in SRM Pro, SRM Amateur, and some older SRM Dura Ace cycle power meters. Changing an SRM crank battery is not trivial and may invalidate your warantee. Unsure of your technical skills and prefer to leave your battery change to an expert? If so contact the UK SRM distributors here.............)

This 3B6880 or 3B880 is a high-capacity cylindrical-type Primary Lithium Battery with a bobbin structure and laser-sealing. The 3B6880 or 3B880 uses Lithium Thionyl Chloride chemistry for a high energy density and a wide operating temperature range of -40°C to + 85°C. Self discharge is low at less than 1% per annum at 20°C, giving an effective shelf life of 10 years.

Click here for a full specification.............

With such a long shelf life, why not buy two or more packs of the 3B6880 or 3B880. Take advantage of our reduced price and make sure you are not left in the lurch next time your battery runs out.

* Actual manufacturer may vary depending upon availability