Home Page

Product Catalogue

Tips and FAQs

About Us

View Your Cart

Terms and Conditions



Contact Us


Small Battery Company logo

R/C Model Battery Auto Cut-off Quick Battery Charger

Name: HPC56. 

Type: Auto Cut-off Quick NiMH/NiCd Battery Charger. 

Input Voltage: 230-240V 50Hz. Output Voltage: 5.6V - 8.4V.

Length: 82 mm. Width: 56 mm. Depth: 50 mm. (excluding three pin plug).

Output: 300 mA, 2.52 VA(max). Weight: 350 g.

Connector: interchangeable Tamiya JST, crocidile clips and 5.5mm barrel connector.

Price: 12.75 each. Postage and packing included.

This charger is designed to be used with a wide variety of power packs for remote control R/C models.

This charger is particularly suited to 7.2V packs such as six cell 7.2 / 1800 mAh powerpacks.

The charger automatically detects the output voltage for charging 5 to 7 cell battery packs.

This charger fast-charges your NiMH or NiCd battery pack and then automatically switches to trickle charge when charging is complete (using Delta V) or after 10 hours so that batteries can be safely left to charge without the risk of overcharging. You can even leave them overnight. Several automatic safety features such as short-circuit protection, over heating protection and reverse polarity detection are included.

The charger is fitted with a Tamiya style plug and/or pair of crocodile clips and has an LED indicator to indicate state of charging:
Power on (no battery is connected): red LED off, green LED on
Fast charge: red LED on, green LED off
Trickle charge: red LED off, green LED on

When using this charger, remember that NiMH and NiCd batteries will reach their peak performance after three or four charge-discharge cycles. NiCd batteries should be discharged fully before re-charging.



© The Small Battery Company 1999 - . All Rights Reserved.